SPRAYTECH 1420 APEX SERIES

Place a waste container next to the original material 1. Page 49 Part No. The seller has relisted this item or one like this. Page 14 Cleanup – Latex materials continued 6. Cleaning the Inlet Valve. Add to watch list.

Do not attempt to unclog or clean the tip with your finger. Page 25 Garder ces consignes. When using oil-based materials, use mineral spirits. Make sure the 2. All information and instructions given in this manual applies to all models except where noted. Switch the pump ON l. When using thicker spray materials, the filter might need to be cleaned more often.

For additional information, see the Global Shipping Program terms and conditions – opens in a new window or tab This amount includes applicable customs duties, taxes, brokerage and other fees. PULL the seriew and aim the spray gun at the side wall of 1. Perform Pressure Relief Procedure, page 7. This listing has ended.

Wagner SprayTECH Apex 2 Paint Sprayer- | eBay

Cleaning the Inlet Valve. Call Customer Service to order new inlet valve assembly Lock the gun and remove spray tip assembly. Don’t have an account? Long-term Storage Long-Term Storage Follow these instructions only after all cleanup steps have been performed.

  B13 ULTIMATUM FILM COMPLET MOTARJAM

Switch the pump ON l. Page 25 Garder ces consignes. NOTE – Do not use a needle or other sharp pointed instrument to clean the tip. Water will go 5.

Do not attempt to unclog or clean the tip with your finger. You should also wipe the threads of the inlet nut a and remove and clean the suction set sraytech filter. Page 49 Part No. All information given for the stand model applies to the cart models except where indicated. Turn pump ON l.

SprayTECH 1420 Owner’s Manual

Sep 22, Sell one like this. Got it, continue to print. Locking the Spray Gun. When using thicker spray materials, the filter might need to be cleaned more often.

The hard tungsten carbide can chip.

If using materials that are oil-based, follow the Cleanup and Long- Term Storage steps. Cleaning the Spray Gun Components. Locking the Spray Gun: Replace suction set and hand-tighten. Twist the knobs on either side of the 2.

All information given for the stand model. Don’t show me this message again. Cleaning The Inlet Valve 4. If you have the model sprayer, skip to item 4, below. The A Fluid Section Seal Kitfollowing list indicates the available repair kits for the parts replaced by Fluid Seies Seal Kiteach kit.

  DJVAR APRUST EPISODE 105

See all condition definitions – opens in a new window or tab. By pressing ‘print’ button you will print only current page. Purging and Priming the Sprayer. To print the manual completely, please, download it.

Wagner SprayTECH Apex 2 1420 Paint Sprayer-

Before You Begin Before you begin – This section contains instructions that will be repeated throughout this manual. All information and instructions given in this manual applies to all models except where noted. Visit us on the world wide web! Lock the spray gun off.

This warranty does not cover any defects or damages caused by service or repair performed by anyone other than a Wagner Authorized Service Center.

Related Posts