KODAK EASYSHARE PRINTER DOCK SERIES 3 ONLY PRINTING HALF PICTURE

I first made both devices open and I compared the insides of the two Printers. Make sure the color cartridge is properly installed Installing and removing the color cartridge. I really have had problems from the start, mostly with the paper jamming every time I wanted to print something, I think I am going to give the camera to my daughter and throw away the printer. Remove check marks next to Pause Printing and Offline, if checked. Access the printer menu for your system. Thank you Bruno, glad it worked out this well too! May 9, It was screwed on an Aluminium profil that was attached on two copper axises.

Nothing happens when you try to print. Make sure the printer dock is not placed in direct sunlight or is not operating in a high-temperature environment. June 23, Posted February 22, 5. Inspect the paper supply: Likes 0 Dislikes 0.

Adjust the exposure compensation on your camera, and try re-taking the picture. The max point reward for answering a question is Good effort nice job. But I’m not really sure if I did pick it up in the news or that it was Polaroid that was news with some kind of new direct developing camera?

Close unnecessary software applications. For excessive dirt or debris, thoroughly seriss the paper tray, and load new paper Loading the paper. So that was the sign to continue the Head exchange.

Although it probably also is the only good way to do this repair eqsyshare February 19, 3. Just mounted with one little screw in the middle of the black plastic cover. Edit the picture using Kodak EasyShare ojly on your computer.

Printing problems

By Jestine Yong on July 16, April 17, The half-printing issue is due kldak the printer becoming clogged with ink fragments and debris. So it was able to adjust its position. Posted on Sep 11, Make sure the paper is loaded with the Kodak logo facing down.

  ARROW SEASON 2 MAVRI XINA

Clear the jam if necessarythen try again. Nothing happens when you try to print from PictBridge compatible device. The image file may be corrupt. I have changed color cartridge but still nothing on half the picture. Check to see if the paper is dirty, and use a dry, lint-free cloth to wipe clean.

Easy share printer dock series 3 kodak only prints half the picture

Do not attempt to remove the cartridge without first clearing the paper error. Unable to remove color cartridge paper light may glow steady amber or blink.

Do not use inkjet paper. Please enter a valid email address.

Kodak EasyShare Printer Dock I found one that was a little different but also from Kodak, an Easyshare Printer Dock Series 3 printer. Tip When cleaning the paper-feed rollers, do not use cotton picturr, paper towels, shop towels or cotton cloths or rags. A selected picture does not print. At the back of the paper it should say “Xtralife”.

How to Troubleshoot a Half Printing Kodak Easyshare Printer Dock

February 22, 5. Because they are correctly adjusted and already originally precisely working after building into the Printer Dock by the Manufacturer.

But like other printers, problems do arise, including the printer sereis functioning properly and only printing half of your selected photo. Repairing Computer Motherboard I got a good blog post by Ranotosh on I won’t buy another from Kodak, thats for sure. February 19, Or your out of ink. Albert van Bemmelen says: It was quite wasyshare repair job but worked out very well in the End.

  VHONG NAVARRO FULL MOVIE LASTIKMAN

Make sure the Paper light is off before attempting to remove the cartridge see Paper light under Printer dock status lights.

It is a shame that I own their products but can’t get new PhotoPacks anymore. But I even take photos of new more expensive electronic devices on the inside to have a snapshot of all components on a Board in case something should burn out. As I have said before, one should exchange the good replacement Thermal Head without adjusting any screws if possible.

Easgshare can download it here.

Turn the rollers with the cloth to remove any caked-on debris from the rollers. And inside this insert you also can see the Aluminium construction on which the Thermal Head is mounted. Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Tell us some more! Above photo displays the bottom connector on my camera that fits exactly on the top of the EasyShare Plus Printer Dock. Replace with new paper if necessary. Posted on Jul 11, Although the photos show every side of this Kodak Photoprinter and I did express that one should be carefull not to disassemble the thermal Photohead in any way!

Reload the paper tray. Posted February 12, 9.

Related Posts